Toshiba Black Pear Installation And User Manual page 34

Additional Setting Restored for Trend Interfaces (TT-64x):
Pin Code
Sensor Base Address
Switch Base Address
Knob Base Address
Object Enable Mask
OutStation Address
CNC IP Address
CNC Address
CNC Port Number
CNC Usage
Additional Settings Restored for BACnet Interfaces (TB-64x):
Device ID
UDP Port
New Setting Comparison
Register as Foreign Device
Foreign Device Reg TTL
Preserve PVs & PAs
Input PV -> Output PV
Function 2 – Enable 'Bootloader' Mode
Bootloader mode allows the firmware to be updated from a PC.
Press and hold in the reset button while powering up the unit. Continue to hold in the reset
button for approx. 5 seconds. The unit is now in bootloader mode.
Note:
Enabling the bootloader in this way is only necessary if the firmware update software
fails to automatically put the unit into bootloader mode.
Disabled
100
50
50
All Objects Enabled
2
192.168.1.1
1
10001
1
200
47808
Disabled
Disabled
1800 seconds
Disabled
Disabled
32