Swing-Out Frame - ABB ACS800-07-0610-3 Hardware Manual

Swing-out frame

The swing-out frame inside the control and I/O cubicle provides space for the control
electronics of the drive, I/O terminal blocks, and optional electrical equipment. The
lead-throughs for I/O cables, the auxiliary voltage transformer, and further space for
additional equipment are available behind the frame. The frame can be opened by
removing the two locking screws (arrowed in the picture below) and moving the
swing-out frame aside. (Depending on selected options, actual equipment of the
drive may differ from what is depicted below.)
Drive control unit
(RDCU) with I/O
terminal blocks
Space for optional
terminal block X2
Terminal block X1
Mounting rails for
additional equipment
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Remove screws (arrowed) to
release swing-out frame
23
I/O cable entry (into
swing-out frame)
Auxiliary voltage
transformer
I/O cable entry (into
cabinet)
Hardware description