LG STB-3000 Owner's Manual page 11

(For STB-3500, STB-3501-UA)
1
Attach the Dual Lock™ in pairs first. Press firmly the whole part of Dual Lock™ to ensure firm
fastening of the protruding parts with each other.
2
After removing the protection paper from the one side of Dual Lock™, stick them to the back of Set-
Top Box as shown.
3
After removing the protection paper from the spacer, stick it to a VESA screw hole on the back of
the TV. (However, you can choose the location to attach the spacer randomly by considering the
shape of the rear side of the TV and the attachment location of the Set-Top Box.)
4
After removing the protection paper from the Dual Lock™, stick Set-Top Box to the TV. Insert and
tighten the screw on the hole with the spacer attached. (When tightening the screws, be sure not
to over tighten them to avoid deformation of the spacer.)
NOTE
• Do not mount by Dual lock™ only without screw.
• If Set-Top Box is not a perfect fit on the rear side of your TV, please place and use it on a flat surface.
• Do not fasten the screw with excessive force.
• Be sure the product surface is clean, and then firmly attach the Dual Lock™.
• Before attaching the Set-Top Box to the TV, let the attached Dual Lock™ dry for at least three days.
Dual Lock™
Spacer
or
M6 x L18
1 EA
or
ASSEMBLING AND PREPARING
11