Mitsubishi Electric GT15-J61BT13 User Manual page 23

(5) Fasten the CC-Link communication unit by tightening its mounting
screws (4 places) with tightening torgue 0.36 to 0.48 N
(6) Fasten the bus connection unit by tightening the board fixing screws (2
places) with the tightening torque of 0.36 to 0.48 N
5)
(7) When installing an extension unit on the unit that has been installed,
remove the connector cover and the sticker.
When not installing an extension unit on the unit that has been installed,
in order to avoid receiving electrostatic, stick accessory stickers to cover
the top of mounting screws (4 places).
Keep the connector cover fixed.
Keep the sticker stuck as it is.
POINT
Remove the screws that fixes the extension interface relay board before
removing the unit.(Above 6))
6)
Connector cover Accessory sticker
Accessory sticker
12
m.
•
m.
•
Sticker