Assembly And Setting Up; Before Fi Rst Use; Operation; Raclette - Silvercrest SRGL 1000 A1 Operating Instructions Manual

Assembly and setting up

GB
WARNING! RISK OF FIRE!
► Never place the appliance underneath wall
cupboards or next to curtains, cupboard
walls or other fl ammable objects.
► Place the appliance only on a heat-resistant
surface.
1) Take all the parts out of the box and remove
the packaging material and any protective
wrapping.
2) Clean all of the components as described in
the section "Cleaning and care". Ensure that
all parts are completely dry.
3) Place the appliance on a heat-resistant, clean
and level surface. Ensure that you do not place
the appliance directly next to a wall or a
cupboard.
Each person should have unimpaired access to
one of the pans 5.
4) Place the griddle 1 on the base unit so that
the griddle 1 is fi rmly in place.
5) Push the pans 5 into the appliance.
6) Insert the plug into a mains power socket.
Before fi rst use
1) Set the temperature control 2 to MAX and
allow the appliance to heat up for 5 minutes.
2) After 5 minutes, turn the temperature control 2
back to level 0.
3) Then disconnect the plug and allow the appli-
ance to cool down.
6
NOTE
► The fi rst time the appliance heats up, a small
amount of smoke and smell may be generated:
this is caused by production residues. This
is completely normal and is not dangerous.
Ensure suffi cient ventilation; for example,
open a window.
4) Wipe the griddle 1 with a moist cloth.
5) Clean the pans 5 and the wooden spatula 6
as described in the section "Cleaning and
care".
6) Ensure that all parts are completely dry before
operating the appliance.
The appliance is now ready for use.

Operation

Raclette

1) Lightly oil the pans 5 on the inside and the
griddle 1 on the top.
2) Insert the plug into a mains power socket.
3) Set the temperature control 2 to MAX. The
indicator lamp 3 illuminates. When the set
temperature has been reached, the tempera-
ture indicator lamp 3 goes out.
TIPS
The indicator lamp 3 illuminates while the
►
appliance is heating up to the set temperature
level. When the temperature level has been
reached, the indicator lamp 3 goes out.
However, this can always illuminate and go
out again. This indicates that the set tempera-
ture has briefl y fallen and the appliance is
heating itself back up.
► The ideal temperature will depend on the
food being cooked: if the temperature is too
high, turn the temperature control 2 towards
"0". If you turn the temperature control 2
towards MAX, the temperature will increase.
SRGL 1000 A1