Panasonic HL-BD82S Service Manual page 15

5.12. Configuration
5.12.1. Power supply 208v voltage selection
This option is provided for areas where standard 240V service is not available.
This option must be accessed with the oven connected to power source, and using the following
sequence:
1. Within five minutes from power up, hold
The display shows as follows:
2. Hold then
[TIME] and
3. Hold [OPTION] and
for an input.
4. Using + [INC] or - [DEC] keys, the control toggles between 240V and 208V options. Hold
5. Hold [TIME] and
6. Hold
[OPTION] key for 3 seconds to quit the user option menu.
The voltage setting is stored and kept even after a long power-off.
[OPTION] and
[LIGHT] keys until the display becomes dark.
[LIGHT] further, until the time display shows "volt"and temperature module shows "240" blinking,waiting
[LIGHT] key in order to quit the selection.
[TIME] key for 3 seconds to enter the user option menu.
15
HL-BD82S
[OPTION] to confirm.