Advertisement
instabus rf
Technical Product Information
January 2005
Hand-held transmitter wave S 425
The deletion of a link is carried out by reconnecting the
device via radio control.
Deletion of the connection between the hand-held
transmitter and the actuator (Diagram D).
1.
Actuator: Switch to special function "Connect".
2.
Hand-held transmitter: Select the taught-in function
via DIP switches F1 and F2.
3.
Hand-held transmitter: Set the special mode "Con-
nect" with DIP switch K.
4.
Hand-held transmitter: Press the level selector but-
ton for the connection that is to be deleted followed
by the channel button.
5.
Hand-held transmitter: Switch the DIP switch back
to the OFF position.
The connection of this hand-held transmitter channel to
the actuator is thereby deleted.
General Notes
• The operating instructions should be handed over to
the customer.
• Any faulty devices should be returned to the local
SIEMENS office.
• If you have additional queries regarding the product,
please contact our Technical Support department:
+49 (0) 180 50 50-222
℡
+49 (0) 180 50 50-223
#
!
adsupport@siemens.com
www.siemens.de/automation/support-request
h
Technical Manual
Update: http://www.siemens.de/gamma
2.20.4.1/6
Notes
wave S 425, 6 pages
Siemens AG 2005
Subject to change without prior notice
black 5WG3 425-7AB21
silver 5WG3 425-7AB71
Siemens AG
Automation and Drives Group
Electrical Installation Technology
P.O. Box 10 09 53, D-93009 Regensburg
Advertisement
