Creating 3G Wan Connection - D-Link DSL-2750U User Manual

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual

Creating 3G WAN Connection

If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to
creating a 3G WAN connection, go to the USB Modem menu and enter the PIN code
displayed (see the USB Modem section, page 152). Then on the connection creation page, go to the
All Settings tab, select the relevant value from the Connection Type drop-down list, and
specify the needed values.
Figure 79. The page for creating a new 3G connection. Selecting a connection type.
Parameter
Enable connection
Connection name
8 For some models of 3G USB modems it is required to disable the PIN code check on the SIM card prior to
connecting the USB modem to the router.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Available for the advanced mode only.
A name for the connection for easier identification.
Page 102 of 210
Configuring via Web-based Interface
Description
8
on the page