Pin - D-Link DSL-2750U User Manual

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Parameter
Signal level
Operator name
Mode

PIN

On the USB Modem / PIN page, you can change the PIN code of the SIM card inserted into your
USB modem, disable or enable the check of the PIN code.
!
The operations presented on this page are unavailable for some models of USB modems.
The current state of the SIM card inserted into your USB modem is displayed in the Status field. If
the PIN code is entered incorrectly or the PIN code is not entered when the PIN code check is
enabled, the Device is locked value is displayed in the Status field. If the PIN code is entered
correctly or the PIN check is disabled, the Device is unlocked value is displayed in the Status
field.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, the Yes
value is displayed in the PIN code request field. If the PIN check is disabled, the No value is
displayed in the PIN code request field.
The signal level at the input of the modem's receiver. The zero
signal level shows that you are out of the coverage area of the
selected operator's network.
When the needed network is available, the name of the operator is
displayed in this field.
A type of the network to which the USB modem is connected.
Figure 121. The USB Modem / PIN page.
Page 154 of 210
Configuring via Web-based Interface
Description