D-Link DSL-2750U User Manual page 104

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Parameter
Without authorization
Username
Password
MTU
Authentication
protocol
Keep Alive
Dial on demand
PPP debug
PPP
Move the switch to the right if your operator does not require
authorization.
A username (login) to connect to the network of the operator.
A password to connect to the network of the operator.
Show icon ( ) to display the entered password.
The maximum size of units transmitted by the interface.
Select a required authentication method from the drop-down list or
leave the AUTO value.
Move the switch to the right if you want the router to
connected to the network of your operator even when the
connection has been inactive for a specified period of time. When
the checkbox is selected, the LCP interval and LCP fails fields
are available. Specify the required values.
Move the switch to the right if you want the router to establish
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
Move the switch to the right if you want to log
connection debugging.
Page 104 of 210
Configuring via Web-based Interface
Description
Click the
keep you
all data on PPP