External Speaker - Kenwood NX-5700 Service Manual

(10) Form the KAP-2 cable as shown in the figure.
2.3.3 External Speaker (Option)
2.3.3.1 KES-3
The KES-3 is an external speaker for the 3.5-mm-diameter
speaker jack.
Connection Procedure
Connect the KES-3 to the 3.5-mm-diameter speaker jack on
the rear of the transceiver.
2.3.3.2 KES-5
External speaker KES-5 can be installed for KAP-2. If KES-5 is
installed, it can be set by changing the CN1 short pin from pins 4
and 5 to pins 5 and 6 on the KAP-2.
KAP-2 CN1 Connect
4-5
5-6
When you use the KES-5, plug the short pin to pins 5 and 6 on
the KAP-2.
When you use the INT. SP or KES-3, plug the short pin to pins 4
and 5 on the KAP-2.
KAP-2 unit
1 CN1
INT. SP
or
KES-3
KAP-2 cable
Fig.3-1
Set Up
INT. SP or KES-3
KES-5
6
KES-5
Short pin
Fig.3-2
Connection Procedure
Insert the crimp terminal into the Square plug supplied with the
KAP-2.
Black/White
4
lead
Square plug
5
(E59-0419-05)
Black lead
Insulating cover
(F29-0481-15)
KAP-2 Cable (E37-1113-25) 6-pin Connector
1 2 3
4 5 6
Fig.3-3
Pin No. Color Name
1 Red HR2
2 Blue GND
3 Yellow OSP
4 Green ESP
5 Brown GND
6 Black HR1
(No.RA020<Rev.002>)1-15