Replacing The Access Panel; Locating Internal Components - HP Elite Slice for Meeting Rooms G2 Hardware Reference Manual

Replacing the access panel

1. Place the Elite Slice G2 upside down on a flat surface covered with a soft cloth.
2. Align the access panel with the computer so that the module connection port is clearly visible through
the opening in the access panel.
3. Tighten the four captive screws to secure the access panel to the computer.
4. Reconnect any additional modules.
For instructions, see

Locating internal components

Item Component
1 System memory modules
Connecting or removing modules on page 7.
Item Component
2 SSD
Locating internal components 25