Siemens CCDA1435-DNX Quick Installation Manual

¼" High Speed Dome Camera CCDA1435-DNX

Quick Installation Guide

A
5
D
1 Dome base
2 Hook
3 Support wire
4 Dome drive
RS485
Control unit CKA482 0
B
6
1
2
7
Data-
Data +
N.C(Normal Close)
COM
N.O(Normal Open)
GND
Alarm4
Alarm3
3
Alarm2
Alarm1
5
4
5 Mounting brackets
6 Switch for termination
7 Terminal for control & Alarm IN/OUT
8 Terminal for power
Dome 1 Dome 10
. . .
1. To reduce the risk of fire or electrical shock, do not expose this product to
2. This installation should be made by a qualified service person and should
WARNING
3. Connect the equipment to 24 VAC UL Listed Class 2 Power Supply.
1. To reduce the risk of electric shock, do not remove cover (or back). No user-
2. Servicing should only be carried out by qualified service personnel.
3. Ensure that the safety wire (located in the dome base) is engaged.
CAUTION
4. Align notch with "OPEN" arrow and turn dome until notch meets arrow in
5. Check assembly by pulling on dome. Assembly should not come apart.
6. Only use the supplied EMI core for the power supply.
E
Interface multiplier
CAD0485-AA
RS485
DomeConverter CAC0103
TTY
RS485
TTY
SIMATRIX 648
rain or moisture.
conform to all local codes.
serviceable parts inside.
"LOCKED" position.
Fire Safety & Security Products
C
10
11
8
9
134
9 BNC connector
10 Notch for installation
11 Installation label
Dome 1 Dome 10
. . .
Control unit CKA4820 Control unit CKA4820
Siemens Building Technologies
Unit:mm