BDL4620QL Safety Instructions TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Warnings and Precautions The Socket-outlet should be installed near the apparatus and be easily KNOW THESE SAFETY SYMBOLS accessible.
BDL4620QL Important Safety Instructions CAUTION service personnel only. To reduce the risk of electric 1. Read these instructions. shock,do not perform any servicing other than that contained in the operating instructions unless you are 2. Keep these instructions. 3. Heed all warnings.
Page 4
BDL4620QL Regulatory Information Use only an RF shielded cable that was supplied with the display when connecting this display to a computer device. CE Declaration of Conformity expose this appliance to rain or excessive moisture. We declare under our responsibility that the product is in conformity...
Page 5
BDL4620QL Information for U.K. only WARNING – THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse.
Page 7
Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations.
BDL4620QL Unpacking and Installation 1.1. Unpacking This product is packed in a carton, together with the standard accessories. Any other optional accessories will be packed separately. Due to the size and weight of this display it is recommended for two people to move it.
BDL4620QL 1.4. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit. We recommend using a mounting interface that complies with UL1678 standard in North America. Protective Sheet Table 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face.
BDL4620QL Parts and Functions 2.1. Control Panel ] button Remote control sensor and power status indicator Press to switch the display on or off. Receives command signals from the remote control. - Lights green when this display is turned on...
BDL4620QL 2.2. Input/Output Terminals SPDIF OUT AC IN Digital audio signal output to connect your external AV device. AC power input. IR OUT / IR IN (3.5 mm) MAIN POWER SWITCH IR signal output/input for the loop-through function. Main power on/off switch.
BDL4620QL 2.3. Remote Control button 2.3.1. General functions ADJUST button Access currently available options, picture and sound menus. BACK button Return to the previous menu page or exit from the previous function. VOLUME button Adjust volume. MUTE button Press to turn the mute function on/off.
BDL4620QL 2.3.2. Inserting batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment.
BDL4620QL Connection NOTE: The peripherals and cables shown are for example purposes only. 3.1. Connecting External Equipments AUDIO IN STEREO AMPLIFIER COMPONENT OUT (YPbPr) AUDIO OUT DVD / VCR / VCD HDMI OUT AC IN HDMI IN DVI IN RJ-45...
BDL4620QL 3.4. Wire-connecting to Network (optional) If you connect this display to a home network, you can play photos, music and videos from your computer. See (Page 10) for more detail. INTERNET ROUTER [RJ-45] [RJ-45] To setup the network: 1. Switch on the router and switch on its DHCP setting.
BDL4620QL Operation DISPLAY 1 DISPLAY 2 NOTE: The control button described in this section is mainly on the ROUTER [RJ-45] [RJ-45] [RJ-45] 4.1. Watch the Connected Video Source See page <7> NOTE: If the apparatus does not return to DLNA mode due to 1.
BDL4620QL 4.3.3. How to use DLNA-DMR from PC Advanced sharing settings Turn on 7. Go to , and check network discovery 1. Press [ ] HOME button, choose Network and press [ button. Play To displays connected to your network. Choose the display, and click...
BDL4620QL To pause the video, press [ ] button. Press [ ] button again to resume playback. Network To skip backward or forward 10 seconds, press [ ] or [ ] Internet button. SmartCMS To search backward or forward, press [G] or [J] button, HDMI press repeatedly to toggle between different speeds.
Page 21
BDL4620QL 2. Move the cursor to URL address bar. Press [ ] button and it will pop out the on-screen keyboard. You can move the cursor to Done Internet Web Address: http:// History www.google.com Bookmark . , @ ‘ Done...
BDL4620QL Change your settings 5.1.1. Picture Using the remote control: Picture Picture style Sound Backlight Tiling Colour Network Sharpness General settings Noise reduction m e n u MPEG artifact reducti... Picture enhancement Advanced Scan mode Format and edges Picture style 1.
BDL4620QL Input resolution {Audio out offset}: Adjust the setting for audio output delay. Available if {Audio out delay} is switched on. Set the special PC timing as {1366x768@60}/{1360x768@60}/ {1280x768@60}/{1024x768@60}/{1440x1050@60}/{1680x1050@60}. Sound reset (For VGA source only) Reset to default setting. Auto adjust 5.1.3.
BDL4620QL 5.1.4. Network Example: 5 x 5 screen matrix (25 displays) H monitors = 5 displays V monitors = 5 displays Picture Network settings H monitor Sound Static IP Configuration Tiling Digital Media Rendere... Position Network Network name General settings...
Page 25
{USB Autoplay} is chosen. You need to create a NOTE: If {Source} folder named “philips” in the USB. Set this display to reduce the power consumption automatically. Note: Factory default setting is “low power standby”, but user could not reset it to default after setting Eco mode to”Normal” by “Factory reset”...
Page 26
BDL4620QL Local KB lock Choose to enable or disable the keyboard (control buttons) function of Schedule 1 Status No repeat the display. Schedule 2 Source Every Sunday {Unlock}: Enable the keyboard function. Schedule 3 On time Every Monday {Lock all}: Lock all keyboard function.
Page 27
BDL4620QL When you press [ ] POWER button to turn on the display from standby mode or change the input signal, the information OSD is displayed on the upper left corner of the screen. Choose {Off} to turn off this function.
BDL4620QL USB device compatibility USB Video Subtitle Formats (for language subtitles, etc.) File Max. Bit Rate Container Video codec Maximum resolution Max. Frame Rate (fps) Audio codec Extensions (Mbps) MPEG-1 1920x1080 25p,30p,50i,60i MPEG-1(L1&L2), .mpg MPEG-2 1920x1080 25p,30p,50i,60i MPEG-1,2,2.5 L3, mpeg AAC/HE-AAC(v1&v2),...
Page 29
BDL4620QL .wma .asf (V2 up to V9.2) .wma WMA Pro WMA,WMA Pro .wav(PC) LPCM LPCM .aif(mac) LPCM LPCM .aiff(mac) .aac .mp4 1024 AAC,HE-AAC(v1&v2) .m4a .pls Playlists .m3u .m4a 1024 AAC,HE-AAC(v1&v2) NOTES: Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed in the table above.
BDL4620QL Input mode PC Resolution: Active Resolution Standard Refresh Rate Pixel Rate Aspect Ratio Stand for Mode Resolution H Pixels V Lines 60 Hz 25.175 MHz 72 Hz 31.5 MHz Video Graphic Array 75 Hz 31.5 MHz WVGA 70 Hz 33.75 MHz...
However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- & LCD- displays with an unacceptable number of defects will be repaired during the warranty period in line with your local guarantee conditions.
BDL4620QL 8.4. Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot Two adjacent dark dots = 1 pair of dark dots minimum distance between dark dots 8.5.
BDL4620QL Cleaning and Troubleshooting 9.1. Cleaning Caution When Using the Display Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes.
BDL4620QL 9.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the 2. Make sure the power switch is switched on.