Installing The Batteries; Installing The Memory Card - HP photosmart 930 series User Manual

Installing the batteries

1
Open the battery door on
the bottom of the camera.
2
Insert the batteries as
indicated inside the door.
3
Close the battery door.
NOTE
For more information about batteries, see
batteries
AC power adapter to power the camera and recharge
batteries in the camera. For more information about the
HP AC power adapter, see
on page 103.

Installing the memory card

1
With the camera turned off and
the back of the camera facing you,
open the memory card door by
sliding the door to the right.
2
Insert the memory card, making
sure that it snaps into place.
3
Close the memory card door.
To remove the memory card, first
make sure the camera is turned off.
Open the memory card door, then
push the memory card in and it will
spring outward from the connector.
16
on page 100. You can also use an optional HP
Purchasing camera accessories
hp photosmart 930 series user's manual
Managing