Resetting The Camera - HP photosmart 930 series User Manual

Problem
My image is
too dark.
(continued)

Resetting the camera

If your camera does not respond when you press any buttons,
use the camera
1
Open the battery door on the bottom of the camera and
remove both batteries.
2
Press the straightened end of a
paper clip into the
until the switch is depressed,
then remove the paper clip. The
camera is reset.
3
Reinsert the batteries and close
the battery door. You may now
use the camera again.
Chapter 7: Troubleshooting and support
Possible cause
Your finger
blocked the
flash.
The scene had
many light-
colored objects,
such as a white
dog in snow.
Reset switch to reset the camera:
Reset
Solution
Be sure to move your fingers
away from the flash when you
take a picture.
Increase the
Compensation
the light-colored objects in the
scene will not look "muddy."
switch
Exposure
(see page 32)
so
83