Panasonic KX-TD500 Installation Manual page 157

4.1.4 VPS (DPT) Port Assignment
Value Range
Parameter
(default)
Port No. 1 - 16 [DLC]
1 - 8 [DHLC]
Ext No.1
DN 3 - 4 digits
consisting of 0-9
Group No.
Ext No.2
DN 3 - 4 digits
consisting of 0-9
Group No.
Status 1. OUS
2. INS
3. FAULT
4-18 System Programming
Specifies the extension port number to which the
VPS(DPT) jack is to be connected.
(Blank)
[Note]
• This program tells the system which extension port is
connected to the Panasonic TVP series Voice
Processing System.
This allows the system to send the proper Digital
Integration information to these ports.
Specifies the extension number for B1 channel.
[Note]
(Blank)
• This program allows you to assign an extension
number to each Voice Mail port. Since each port
connected to the VPS provides two extensions, this
enables you to assign extension numbers to each port.
To reach the Voice Mail system, users dial these
extension numbers.
Specifies the Extension Group number (1 -128) to
1 - 128
which the B1 channel of the VPS(DPT) port is
(Blank)
assigned.
Specifies the extension number for B2 channel.
(Blank)
Specifies the Extension Group number (1 -128) to
1 - 128
which the B2 channel of the VPS(DPT) port is
(Blank)
assigned.
Specifies the operating status of the VPS (DPT) port.
1. OUS: The VPS port is Out-of-Service.
2. INS: The VPS port is In-Service.
3. FAULT: The VPS port is defective.
Description/Function Reference
Extension
Port
Assignment
Sec. 4.1.3
Numbering
Plan
Sec. 4.2.2
Extension
Group
Sec. 4.3.2
Numbering
Plan
Sec. 4.2.2
Extension
Group
Sec. 4.3.2