Amphenol 57Je Type Connector - Panasonic KX-TD500 Installation Manual

2.1.4

Amphenol 57JE type connector

To connect Amphenol 57JE type (screw-attach-type 50-pin connector) to the Option
Card, follow the procedure below.
1. The 50-pin connector (jack) on the Option
Card has two hook-pins.
Remove the upper hook-pin, taking out
the screw.
Screw
Hook-pins
2-6 Installation
Option Card
50-pin connector
2. To attach the Amphenol 57JE type (plug) to
the connector, drive the accessory Screw at
the upper part, and fasten the accessory
Wire Tie around the lower hook-pin and the
Amphenol 57JE type, as shown.
Accessary
Screw
Amphenol 57JE type
Accessary
Wire Tie
When connecting a connector of the type shown
below, unscrew the lower hook-pin, too. Then drive
both accessory Screws.
Accessary
Screw
Amphenol
57JE tyoe
Accessary
Screw
50-pin
connector
Hook-pin
57JE type
Hook-pin
Accessary
Wire Tie
Option Card
50-pin connector