Panasonic KX-TD500 Installation Manual page 164

4.2.2 Numbering Plan
Value Range
Parameter
(default)
7 7th Hundred 1-2 digits
Block Extension consisting of 0-9
. .
. .
. .
. .
. .
16 16th Hundred
Block Extension
17 Operator Call 1-4 digits
consisting of
0-9, and #
18 Local CO Line
Access / ARS
19 Trunk Group
Access
20 Speed Dialing -
System
21 Speed Dialing -
Station
22 Speed Dialing -
Station
Programming
23 Doorphone Call
24 External
Paging
25 External Paging
Answer / TAFAS
Answer
26 Station Paging
27 Station Paging
Answer
28 CO Call Pickup
Same as parameters No.1 through 6.
(Blank)
Specifies the feature number for calling the Operator.
FDN for each Operator Group can also be used for this
purpose.
(0)
˝ Specifies the feature number for making an outside call
(9) by "ARS(Automatic Route Selection)" or "Idle Trunk
Dial Access."
˝ Specifies the feature number for making an outside call
(8) by specifying a Trunk Group (01-48).
˝ Specifies the feature number for making a call using a
( ) System Speed Dialing number.
˝ Specifies the feature number for making a call using a
(3 ) Station Speed Dialing number.
˝ Specifies the feature number for programming Station
(30) Speed Dialing numbers at each extension.
˝ Specifies the feature number for making a call to a
(31) doorphone.
˝ Specifies the feature number for making a paging
(32) announcement through External Pagers.
˝ Specifies the feature number for answering the paging
(42) announcement through External Pagers and TAFAS
(Trunk Answer From Any Station) calls.
˝ Specifies the feature number for making a paging
(33) announcement through the built-in speaker of PTs.
˝ Specifies the feature number for answering the paging
(43) announcement through the built-in speaker of PTs.
˝ Specifies the feature number for answering a CO call
(4 ) ringing at another extension.
Description/Function
System Programming
Reference
Flexible
Numbering
(F/G)
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
4-25