[Main] Tab Settings - Sony UP-D711MD Setup Manual

[Main] tab Settings

This tab is used to make basic printing settings.
Paper Size
Select the paper size.
Item Description
596 × 896 50.4 mm × 75.7 mm
672 × 896 56.8 mm × 75.7 mm
896 × 896 75.7 mm × 75.7 mm
896 × 1196 75.7 mm × 101.1 mm
896 × 2688 75.7 mm × 227.1 mm
Paper Type
Selects the paper type that has been set. The setting
values of paper type and paper size are as follows.
Paper type Paper size
S UPP-84S
HG UPP-84HG
Copies
Select the number of copies to print (1 to 255).
Scaling
Select the rate of enlargement or reduction (25% to
400%). To change the interpolation method, select a
[Interpolation Method] setting below. [Enlarge to Paper]
cannot be used with this feature.
High Speed Print Mode
Check this check box to print in the high-speed mode.
Enlarge to Paper
If the image size is smaller than the paper size, the image
is enlarged automatically to fit the paper size. To change
the interpolation method, select a [Interpolation
Method] setting below. [Scaling] cannot be used with
this feature.
Interpolation Method
Select the image interpolation method ([Bilinear],
[Nearest Neighbor]).
Auto Post Feed Mode
Sets the paper feed (short/long). Checking this box
results in a longer paper feed after printing. With a
longer feed, the paper will advance to the cutting
position without pressing the FEED button.
Check this box to cut paper after printing. If more than
one page is printed, margins between images are
increased. If this box is checked, [Once every __ Sheets]
can be set.
Not checking this box results in a shorter paper feed
after printing. Uncheck this box to print more than one
page and to reduce margins.
Note
With a short paper feed, press the FEED button to cut
paper after feeding. If paper is cut without pressing the
FEED button, an image may be cut in half.
Once every __ Sheets
You can set the value for how frequently a long feed is
applied.
A short feed is applied until the number of pages you set
have been printed, after which a longer paper feed is
applied.
The count is reset when the number of printed pages
reaches the preset value. The count will also be reset if
power is turned on, the FEED button is pressed, print
number is changed, or printing is canceled.
(Example. 1) Value is set to 1:
long margin
The circled numbers mean counter.
4
Configuring the Printer