Message List - Sony UP-D711MD Setup Manual

Test
Verify the position in which message dialog boxes
appear on the display or screen. A test dialog box will
appear in the position defined with the [Horizontal] and
[Vertical] settings.
Use the Simple Dialog Box
Select this check box to display smaller size message
dialog boxes.
Restore Defaults
Restores all settings in the [Message] tab to their default
condition.

Message list

Displayable messages are as follows. Fix any issues,
following the messages below. For further details on
fixing issues, refer to the operating instructions for UP-
D711MD in combination with this manual.
Standard message dialog
box
No thermal paper. Please set
the thermal paper. To continue
printing, click "Retry."
Windows will automatically
retry after 5 seconds.
Now, Feeding. Please wait. To
continue printing, click
"Retry." Windows will
automatically retry after 5
seconds.
Door is open.Please close the
door. To continue printing,
click "Retry." Windows will
automatically retry after 5
seconds.
Now regulating the head
temperature of the printer.
Please wait. To continue
printing, click "Retry."
Windows will automatically
retry after 5 seconds.
Mechanical error. Printing has
been aborted. Please turn off
the printer, then turn it back on
and print again.
Printer is not ready. Make sure
the printer is plugged in to a
power source and the printer
cable is correctly connected.
To continue printing, click
"Retry." Windows will
automatically retry after 5
seconds.
Small message dialog
box
Set thermal paper.
Please wait.
Close door.
Please wait.
Restart printer.
Check printer.
Message list
7