c.
Remove the display hinges (3).
The display hinges are available using spare part number L19185-001.
13.
If it is necessary to replace the display panel cable:
a.
Disconnect the cable from the camera module (1).
NOTE:
cameras.
b.
Release the cable from the retention clips (2) and routing channel built into the bottom edge of the
display enclosure.
c.
Remove the display panel cable (3).
The display panel cable is available using the following spare part numbers:
●
●
Models with an HD camera
44
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Cables connect to both sides of IR cameras. A single cable connects to only one side of HD
L19187-001 – HD non-infrared camera
L19188-001 – FHD infrared camera