Optane Memory Module - HP Pavilion 14 Maintenance And Service Manual

Optane memory module

IMPORTANT:
drives. You cannot install both an Optane memory module and a solid-state drive in the computer.
Description
Optane memory module, 16 GB
Before removing the Optane memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the Optane memory module:
Remove the Phillips M2.0×3.0 screw (1), and then pull the solid-state drive module from the socket (2).
▲
Reverse this procedure to install the Optane memory module.
52 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
The Optane memory module is installed into the M.2 connector that is used by M.2 solid-state
Bottom cover on page
Battery on page
33).
36).
Spare part number
L18506-001