Pc Interface (V24, Usb) - Siemens HiPath 4000 Operating Manual

PC interface (V24, USB)

You can use the PC interface (via a SLIM Lumberg cable) to read and mod-
ify phonebook entries, pictures and sounds.
Configuring the PC interface
In order to configure the PC interface, you will need to perform the follow-
ing steps:
1. deactivate the Bluetooth interface on the handset (
2. use a Siemens data cable (
terface jack on the handset to the computer.
3. install the MPM application.
For more information, consult your system administrator.
If the PC interface does not work, first deactivate the Bluetooth in-
terface ( Page 100), then switch the handset off and back on.
Data transfer mode
Large volumes of data are transferred between the handset and the com-
puter for certain functions. In this case, the handset is switched to data
transfer mode and data transfer appears on the display. In this mode, no
inputs are possible via the keyboard and calls are ignored.
The handset is switched to data transfer mode by:
• activating read/write access to the phonebook
• loading screensavers
• loading melodies
The handset automatically switches to idle if a fault occurs in the
course of transferring data.
Page 109) to connect the headset/PC in-
Additional functions
Page 100).
97