Suppressing Call Id Display For Called Party - Siemens HiPath 4000 Operating Manual

Conducting calls – enhanced functions
Step by step
> <
VARY FORWARD
SAVE
> <
BASIC SERVICE
> <
OTHER FUNCT.
> <
DISPLAY
56
Entering the PIN for your own and another
HiPath 4000-system within the integrated network:
o
Enter the 2-digit node code for your own HiPath 4000
system (consult System Support).
o r
Enter your own number and press the hash key.
o r
Enter the network-wide PIN and press the hash key.
Dialling after (successful) identification:
You will hear the dialling tone. The following appears on
the display:
"Please dial".
o
Enter a phone number.
Call forwarding - follow me after successful identi-
fication:
[
Select the menu item and confirm.
[
Confirm. Call forwarding is activated immediately.
Suppressing call ID display for called
party
The call ID display can only be suppressed for one sub-
sequent call and the setting is not saved if the number
is redialled.
u Call the system menu.
[
Select and confirm the basic service.
either:
8 2 Enter the service code.
or:
[
Select the menu item and confirm.
[
Select the menu item and confirm.
then:
o
Enter the phone number of the user. If the extension ac-
cepts the call, your phone number will not be displayed.