5.8.2
Installation
1.
Push condenser upwards onto the fan housing
2.
Attach support rail
3.
Attach screws to housing
4.
Attach clamping ring to washing machine tub (3)
Leak!
Leakage water
►
When installing the collar on the tub, do not use
any lubricant, e.g. washing up liquid, as the
gasket can easily slip off the connecting piece
again.
►
Ensure it is seated correctly!
CAUTION
5.
Attach back cross-bar
6.
Attach back appliance cover
7.
Connect plug to NTC condenser output (NTCD2)
8.
Attach VDE cover
815_58300000146136_ara_en_b.doc – 12.04.10
Seite 30 von 32