Table of Contents
Advertisement
5.1.2. Mounting the IEC rail fixing square washers
(Montage de rondelle carrée pour fixer IEC rail)
Use the square washers and mounting screws (M5 × 10) to fix the IEC rail to the position where the main unit will be
installed.
(Utilisez rondelles carrés et bornes de montage (M5 × 10) pour fixer l'IEC rail dans la position où l'unité principale
sera installée.)
Square washer
Rondelle carrée
Mounting screw (M5 × 10)
Borne de montage (M5 × 10)
Keep 80 to 90 mm between the square washers.
(Maintenez de 80 à 90 mm entre des rondelle carrées.)
35 mm
IEC rail
IEC rail
Make sure to place the square washers parallel to the IEC rail (the washers should fit into a groove in the rail).
(Assurez-vous à placer des rondelle carrées en parallèle de l'IEC rail.)
Square washer
Rondelle carrée
IEC rail
IEC rail
View A
Vue A
80 to 90 mm
IEC rail
IEC rail
Mounting screw
Borne de montage
Installation side
Square washer
Rondelle carrée
Côté d'installation
View A
(planche, etc.)
Vue A
IEC rail
mounting
square washer
Rondelle
carrée pour
fixer IEC rail
Square washer
Rondelle carrée
18
IEC rail
IEC rail
(panel, etc.)
IEC rail
IEC rail
Advertisement
Table of Contents
