Table of Contents
Advertisement
CAUTION
y Ensure that you connect the earth ground wire to prevent possible electric shock. Do not try to ground
the product by connecting it to telephone wires, lightning rods or gas pipes.
y The product should not be exposed to water (dripping or splashing) and no objects illed with liquids, such
as vases, should be placed on the product.
y To prevent ire or electric shock hazard, do not expose this production to rain or moisture.
y Do not block any ventilation openings. Ensure reliable operation of the product and protect it from over
heating. The openings shall never be blocked by placing any object on this product.
y The temperature of metal enclosure may be high during operation.
y In order to avoid radio-interference, all accessories (like a smart meter) intended for connection to
the product shall be suitable for use in residential, commercial and light-industry areas. Usually this
requirement is fulilled if the equipment complies with the class B limits of EN55022.
y The product must be disposed of according to local regulations.
y The electrical installation of this unit must only be performed by electricians or technicians, qualiied to
install PCS.
y Danger of damaging the PCS by overload. Only connect the proper wire to DC terminal block. Refer to the
installation wiring diagram for details.
y Connect the DC+ and DC- cables to the correct DC+ and DC- terminals on the product.
y Do not step on the product or the product package. The product may be damaged.
y Do not dispose of batteries in a ire. The batteries may explode.
y Do not open or damage batteries. Released electrolyte is harmful to the skin and eyes. It may be toxic.
y A battery can present a risk of electrical shock and high short-circuit current. The following precautions
should be observed when working on batteries.
a) Remove watches, ring, or other metal objects.
b) Use tools with insulated handles.
c) Wear rubber gloves and boots.
d) Do not lay tools or metal parts on top of battery.
NOTE
Indicates a risk of possible damage to the product.
y Before making connections, please make sure the PV array open circuit voltage is within 800 V. Otherwise
the product could be damaged.
y Never use any solvents, abrasives or corrosive materials to clean this product.
y Do not store on or place against any objects to the product. It may cause serious defects or malfunction.
y Before making a connection, make sure the PV switch on this product is switched off.
y This unit is designed to feed power to the public power grid only. Do not connect this unit to an AC
source or generator. Connecting the product to external devices could result in serious damage to your
equipment.
y Serving of batteries should be performed or supervised by personnel knowledgeable about batteries and
the required precautions.
Indicates a situation where damage or injury could occur. If it is not avoided,
minor injury and/or damage to property may result.
Getting Started
1
3
Advertisement
Table of Contents
