Appendix; Maintenance; Cleaning The Product; Inspecting Regularly - LG ED05K000E00 Installation Manual

Energy storage system
Hide thumbs Also See for ED05K000E00:
Table of Contents

Advertisement

Maintenance

Cleaning the product

To clean this product, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened
with a mild detergent solution. Do not use strong solvents such as alcohol, benzene, or thinner, as these might
damage the surface of the product.
Do not use volatile liquids such as insecticide spray near this product. Wiping with strong pressure may
damage the surface. Do not leave rubber or plastic products in contact with the product for a long period of
time.
When cleaning the air duct, shut off all the systems including PCS, PV module, battery, AC circuit breaker. After
that, open the lower cover of the PCS and remove dust on the air duct using a soft brush.

Inspecting regularly

It is recommended to check the operating status and connection status once a year. Contact authorized dealer
or where you purchased.

Disposing the product

When the product reached to the end of its service life or defect beyond repair, dispose the product according
to the disposal regulations for electronic waste in your area. Disposing the product must be carried out by
qualiied personnel only. Contact authorized dealer or where you purchased.

Disassemble the product

You may need to disassemble the product when you move or dispose the product. You must keep the
procedure as described, otherwise there may have electric shock or serious burns due to the high voltages.
WARNING
y All work on the product disassembly must be carried out by qualiied personnel only.
y There is high possibility of electric shock or serious burns due to the high voltages in power conditioning
circuits.
y Wear rubber gloves and protective clothing (protective glasses and boots) when working on high voltage/
high current systems such as PCS and battery systems.
A
B
Tab [
] on the main screen and tab [Start].
A notice appears on the screen.
Tab [Accept] to stop operation.
Turn off the DC disconnect switch on the
bottom of the product. And turn off the DC
circuit breaker of the connected battery. Refer to
battery manual for more information of turning
off the DC circuit breaker.

Appendix

45
5

Advertisement

Table of Contents
loading

Table of Contents