Mitsubishi Electric C80 series Maintenance Manual page 54

C80 Series Maintenance Manual
3 Maintenance of the Drive Unit
<MDS-EJ-SP-100/120>
Cooling fan
lead wire
Cooling fan
Insert the connector so that it will reach
the end of the stopper when assembling.
Direction of
the fan wind
Attach the harness
to the position
described in the
figure above.
Sleeve
Connector
Place the fan harness inside the chassis
using the positioning boss for the chassis.
Fold the harness to put it inside so that it will
not be stuck by the cooling fan.
25
Direction of
the fan wind
Keep the clearance even.
IB-1501454-C