Vacation And Moving; Reinstalling/Using Ice Machine Again - Haier HI50IB Installation And User Manual

ICE MACHINE CARE

VACATION AND MOVING

If the ice machine will not be used for a long time, or is to be moved to
another place, it will be necessary to drain the system of water.
1. Unplug the ice machine or disconnect power.
2. Shut off the water supply at the main water source.
3. Disconnect the water supply line from the water inlet.
4. Take out the ice storage bin to remove any remaining ice and water. Dry
the bin.
5. Pull the drainage tube from the water trough
to drain off all water.
6. Leave the door open to allow for air
circulation and to prevent mold and mildew.
7. Leave water supply line and power cord
disconnected until ready to reuse.
8. If the ice machine location requires a drain
pump, disconnect drain pump power cord
and remove the remaining water (empty the tank).

REINSTALLING/USING ICE MACHINE AGAIN

To Reinstall ice machine after non-use, vacation, winter storage or
moving:
1. See "Installation Instructions" to locate, level and connect ice machine.
2. Clean ice machine. See "Cleaning."
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
3. Plug into a grounded 3 prong outlet.
4. Discard the first few batches of ice produced.
24
WARNING
Electrical Shock Hazard
Drainage
Tube
49-60811