Attaching The Lens - Panasonic ET-D3LEF70 Operating Instructions Manual

Attaching the Lens / Detaching the Lens (continued)

Attaching the Lens

( i ) ( i )
Lens drop prevention screw
Attention
z For projectors that have a projection lens cover, remove it first. For details, see "Attaching/removing the
projection lens (optional)" in the operating instructions for the projector you are using.
z After attaching the projection lens, turn on the projector and perform lens calibration. (
6-ENGLISH
Orange color
( ii ) ( ii )
The illustration for this procedure uses PT-RZ21K as
an example.
1) Insert the fisheye lens while
aligning its marker (orange) with
the marker on the projector (○ to
the left of "LOCK"), and turn it
clockwise until it clicks into place.
2) Use the lens drop prevention
screw supplied with the projector
to secure the fisheye lens.
z Use a Phillips screwdriver to secure the
screw in the hole to the right of the marker
(orange) on the fisheye lens (see left
illustration).
Attention
z Gently turn the fisheye lens counterclockwise,
and verify that it is secure.
 Page 7)