Table of Contents
Advertisement
Attaching the Lens / Detaching the Lens (continued)
Lens calibration
Perform lens calibration after attaching the lens.
The lens calibration procedure differs depending on the projector you are using and the main version of the
firmware.
z PT-RQ32K / PT-RZ31K / PT-RS30K: Main version is 3.00 or later
Refer to "Case 1" (
Page 7).
z PT-RZ21K / PT-RS20K: Main version is 2.00 or later
Refer to "Case 1" (
Page 7).
z PT-RQ13K / PT-RZ12K / PT-RS11K / PT-DZ21K2 / PT-DS20K2 / PT-DW17K2 / PT-DZ16K2 / PT-DZ13K /
PT-DS12K / PT-DW11K / PT-DZ10K
Refer to "Case 2" (
Page 9).
■ Case 1
z PT-RQ32K / PT-RZ31K / PT-RS30K (main version of the firmware is 3.00 or later)
z PT-RZ21K / PT-RS20K (main version of the firmware is 2.00 or later)
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
3D SETTINGS
DISPLAY OPTION
PROJECTOR SETUP
P IN P
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
ENTER
PROJECTOR SETUP
PROJECTOR ID
PROJECTION METHOD
LENS
OPERATION SETTING
LIGHT OUTPUT
BRIGHTNESS CONTROL
STANDBY MODE
NO SIGNAL SHUT-OFF
NO SIGNAL LIGHTS-OUT
INITIAL STARTUP
STARTUP INPUT SELECT
DATE AND TIME
MENU SELECT
SUB MENU
ENTER
1/2
ALL
NORMAL
100.0%
AUTO
NORMAL
DISABLE
DISABLE
LAST MEMORY
LAST USED
1) Press the <MENU> button.
z The [MAIN MENU] screen appears.
2) Use the ▲ and ▼ buttons to select
[PROJECTOR SETUP].
3) Press the <ENTER> button.
z The [PROJECTOR SETUP] screen appears.
4) Use the ▲ and ▼ buttons to select
[LENS].
5) Press the <ENTER> button.
z The [LENS] screen appears.
ENGLISH-7
Advertisement
Table of Contents
