Bosch D9068 Operation And Installation Manual page 55

D9068 | Operation and Installation Guide | Appendix B: 4/2 Reporting Codes
.
Table 13: 4/2 Reporting Codes (Continued)
4/2 Report Keypad
Code Number Key
TRBL INP RPT [9]
TRBL INP RST [1]
ANALOG SERVC [2]
ANALOG RESTR [3]
1
EQUIP FAILR [4]
1
EQUIP RESTOR [5]
1
NETWORK FAIL [6]
NETWORK RSTR [7]
1
SENS BUS RPT [8]
SENS BUS RST [9]
2
RMT PGM FAIL [1]
2
RMT PGM SUCC [2]
UNKNOWN FALT [3]
1
Item is sent only when the D9068 is configured to communicate with a Bosch Security Systems, Inc.
D8024 or D10024/D10024A Analog FACP.
2 Item is for future use.
Bosch Security Systems, Inc. | 3/13 | F01U071094-07
Group
Definition
Number
3 Trouble Input Report. Sent when system fault input is
active.
4 Trouble Input Report Restore. Sent when system fault
input restores.
4 Analog service.
4 Analog restore.
4 Equipment Failure.: Sent for equipment failure problems.
4 Equipment Restore. Sent for equipment failure problems.
4 Network Failure. Sent for network failure problems.
4 Network Restore. Sent for network failure problems.
4 Sensor Bus Report.
4 Sensor Bus Restore.
5 Remote Programming Failure. Sent when there are problems
with remote programming.
5 Remote Programming Success. Sent when remote programming
is successful.
5 Unknown Fault. Sent for problems of an unknown nature.
55