To Change The Audio Properties For The Playback Device; Figure 2-23 Setting Playback Properties; Table 2-2 Default Audio Settings - NEC SL1100 Manual

SL1100
___________________________________________________________________________________
C
S 5
HANGING
ECTION
(Only applies when using Windows 7 or WIndows Vista)
Successful operation of the softphone within Windows 7 requires that the audio
properties be set to a supported format. The default settings for the audio device must
be set within the range of values shown in the following table.
5.1
___________________________________________________________________________________
Desktop Suite
A S
UDIO
Sampling frequency (Hz)
Quantization bit
Channel

To change the Audio Properties for the Playback device:

1.
On the Windows Control Panel, select the Sound option.
2.
On the Playback tab, select the device to be changed and press the Properties
button.
W
ETTINGS IN INDOWS

Table 2-2 Default Audio Settings

Figure 2-23 Setting Playback Properties

7
8000 / 16000 / 32000 / 48000
16 bit
all values supported
Issue 1.0
2 - 25