NEC SL1100 Manual page 94

Issue 1.0
___________________________________________________________________________________
If automatic or manual mode is used, the user must enter a user name and password.
If the Desktop Application is run in deskset mode (controlling a physical phone) and
the deskset phone used is an IP phone, the user name and password used for the
Desktop Application is different than that of the actual IP phone. Below outlines
examples of a SL1100 system set for Automatic or Manual registration. The example
assumes the system has 32 digital stations using ports 1~32 and eight IP stations
using ports 33~40. The number plan has extensions 101~199 assigned to ports
1~99.


___________________________________________________________________________________
5 - 2
Example 1
IP station extension 150 is using port 33 and logs in with the user name and
password assigned to extension 150. If a user wants to run a Desktop
Application for extension 150, a new user name and password must be defined.
This username and password must be assigned to an unused port. In this
example, it can be ports 41~99 and the example will use port 41 (ext 141). In
Automatic registration, the user name and password assigned to extension 141
is entered in the Desktop Configuration. In Manual registration, when the
Desktop application is launched, the user will be prompted for a user name and
password. The user would enter the user name and password assigned to
extension 141. At this point, port 41 will no longer be available in the system
because it is registered to the PC running the Desktop Application for extension
150. The key point in this example is that the Desktop Application running in
deskset mode for an IP phone cannot use the same user name and password
assigned to the IP phone because the Desktop Application connection uses a
different port.
Example 2
Digital station extension 101 is using port 1. If a user wants to run a Desktop
Application for extension 101, a user name and password must be assigned to a
port the Desktop Application will use to register with the system. In this
example, port 42 (ext 142) will be used. In Automatic registration, the user name
and password assigned to extension 142 is entered in the Desktop
Configuration. In Manual registration, when the Desktop Application is
launched, the user will be prompted for a user name and password. The user
would enter the user name and password assigned to extension 142. At this
point, port 42 will no longer be available in the system because it is registered to
the PC running the Desktop Applications for extension 101.
Desktop Registration and Softphone Override
SL1100