Transfer Call - Start; Transfer Call - Blind; Transfer Call - Cancel; Hang Up - NEC SL1100 Manual

SL1100
___________________________________________________________________________________
1.4
___________________________________________________________________________________
Desktop Suite
1.3.1 Transfer Call – Start
When the Start button is selected, the software will initiate a
supervised transfer of
tab in Preferences)
to Figure 3-2 Transfer Call –
Selecting the Complete button will connect the original caller to the

destination and disconnect the user.
Selecting the Disconnect button will hang up from the call to the

Destination, and reconnect to the original caller.
1.3.2 Transfer Call – Blind
When the Blind button is selected, the application will initiate an

unsupervised transfer to the specified destination.
Once the transfer is complete, the active call will be removed from the

active call area.
1.3.3 Transfer Call – Cancel
When the Cancel button is selected, the transfer operation will be

cancelled and the Transfer dialog will be closed.
Pressing the Esc key will also initiate the Cancel operation.


Hang Up

The Hang Up button will disconnect the user from the active call.

When the active call is disconnected, the associated entry in the Active

Call list will be removed.
(blind transfer may be selected from the Shortcuts
the call. The Transfer dialog will be updated (refer
Start).
Figure 3-2 Transfer Call – Start
Issue 1.0
3 - 3