Beko BEKOMAT 32U Instructions For Installation And Operation Manual page 5

Condensate drains
Table of Contents

Advertisement

Danger!
Supply voltage!
There is the risk of an electric shock involving injury or death when coming into contact
with non-insulated components carrying supply voltage.
Measures:
During electric installations, all regulations in force need to be adhered to (e.g. VDE 0100 / IEC 60364).
When the control unit is open, service and installation works must only be undertaken when the
system is deactivated.
The removed control unit has no IP degree of protection.
All types of electrical works must be carried out by authorised and qualified personnel only.
Further safety instructions:
For installation and operation, the national regulations and safety codes in force must also be adhered
to.
Do not use the BEKOMAT
Regarding the inlet screw joints, excessive tightening forces must be avoided. This applies in particular
to conical screw joints.
The BEKOMAT
®
32U will only function when voltage is applied.
Do not use the test button for permanent drainage.
Use genuine spare parts only. This is imperative to ensure perfect functioning.
Additional advice:
The removed control unit has no IP degree of protection.
During installation, use spanner flat at the feed pipe (wrenchsize SW27) as a back rest.
The service unit must not be dismantled.
Caution!
Malfunction during operation!
Through incorrect installation and poor maintenance, malfunction may occur at the
BEKOMAT
Condensate which is not discharged may cause damage to plants and in production
processes.
r
Measures:
Condensate drainage which is reliable in performance directly optimises the compressed-air quality.
To prevent damage and breakdowns, it is imperative to observe the following:
Exact compliance with the specifications of use and with the performance parameters of
the BEKOMAT
Exact compliance with the installation- and operation instructions in this manual
Regular maintenance and control of the BEKOMAT
operating manual
BEKOMAT® 32U
®
32U in hazardous areas.
®
.
®
, in connection with the case of application (see "Proper use" section)
Safety instructions
®
in accordance with the instructions in this
5

Advertisement

Table of Contents
loading

Table of Contents