Appliance-Specific Safety Instructions - Silvercrest SUR 46 C2 Operating Instructions Manual

Appliance-specific safety instructions
GB
■
■
■
■
■
■
■
■
■
■
■
6
The appliance may only be used only on a level, non-slip
surface and never on a soft pad.
To prevent an overflow during the cleaning process, the stain-
less steel bath should not be filled above the MAX marking.
Always use the basket insert when cleaning small parts to
prevent scratches to the components themselves or the stain-
less steel bath. If several items are being cleaned at the
same time, ensure that they do not come into contact with
each other in order to prevent scratches.
Always use the basket insert when cleaning spectacles or
jewellery. When placing spectacles in the basket insert,
always make sure their lenses face upwards.
Rinse your spectacles and jewellery with clear water after
each cleaning.
During the cleaning process, do not touch the inner surface
of the stainless steel bath or the cleaning fluid. Ultrasonic
waves can damage your health.
Do not clean any objects with scratched surfaces as existing
scratches may be made worse by an ultrasonic treatment.
Never use the appliance without water as this may damage
the appliance.
After using the appliance five times in a row without a break,
complete the cleaning process and let it cool down to room
temperature.
Place the appliance on a firm, level surface.
Do not place the appliance and its accessories on or in the
vicinity of surfaces that are hot or could heat up, e.g. electric
hobs.
SUR 46 C2