Dell PowerEdge FN Installation Manual page 11

Figure 2. System LED Displays (I/O Panel)
1 – System Status LED
2 – System Power LED
The following table lists the LED definitions for the aggregator.
Table 1. System LED Displays
System LED LED Color/
Display
• Green
Power
• Off
• Blue
Status
• Off
• Amber
NOTE: The front-end ports also contain LEDs that provide information about the link status and
traffic activity on a port.
NOTE: When the ingress air temperature exceeds 60°C, the Status LED turns amber and a major
alarm is triggered.
Table 2. SFP+ and 10G BaseT Port LEDs
Label LED Color/
Display
• Off
Link LED
• Solid green
• Solid amber
• Off
Activity LED
• Blinking green
Hardware Overview
Description
• Power is being supplied to the switch.
• The switch does not have power.
• The switch is operating normally as a standalone switch or as
a stack master.
• The switch is not the stack master.
• A fault has occurred, or the switch is booting.
Description
• The port is down.
• The port is up and can transmit traffic at maximum speed. A
SFP+ or BaseT port can transmit at 10G.
• The port is up and is transmitting traffic at lower than
maximum speed. A SFP+ or BaseT port is transmitting at 1G.
• No traffic is being transmitted or received on the port.
• Traffic is being transmitted or received on the port.
11