Epson UB-S09 User Manual

Introduction
The UB-S09, designed for Epson TM printers and
Epson customer displays, is a serial interface that
has a maximum transmission speed of 115.2K bps
[bps: bits per second] with the TM printers or DM-
D series applicable to this product.
This manual provides instructions for operators of
POS systems in which the UB-S09 is installed so
that the operators can use the UB-S09 safely and
correctly. For information about installation and
settings required, see the UB-S09 Developer's
Guide. Contact your Epson representative or your
place of purchase to get the UB-S09 Developer's
Guide.
Key to Symbols
The symbols in this manual are identified by their
level of importance, as defined below. Read the
following carefully before handling the product.
CAUTION:
Observe cautions to avoid minor injury to yourself,
damage to your equipment, or loss of data.
Note:
Notes have important information and useful tips
on the operation of your equipment.
Caution Label
The following caution label is visible near the
modular connector (customer display connector).
The label has the following meaning:
"Use a modular connector specifically designed for
a customer display for this product. Do not
connect this connector to an ordinary telephone
line."
User's Manual
©Seiko Epson Corporation 2000-2018. All rights reserved.

Part Names

The following view shows the part names of the
UB-S09.
customer display
connector
1
Printed in China
caution serial interface
label connector