Table of Contents
Advertisement
Confi guring the System Setup
Entering the System Setup
* Make sure to connect the USB keyboard before use.
Confi guring the system setup involves accessing the CMOS RAM where the hardware
confi guration is stored. Through the system setup process, the product acquires informa-
tion about the current date and time, memory capacity, hard disk capacity and type, etc.
This process is used for changing the password, modifying the boot order, or adding a
new device.
The information displayed in the setup window may vary depending on the product speci-
fi cation.
Caution
● Do not change the system setup unless necessary. An incorrect system setup may
cause an error so you will have to be careful.
● The CMOS setup menu and the factory default settings may be changed without
prior notice for performance improvement and may differ from the ones shown in
this user manual.
1. Turn the product power on.
2. When the logo appears, press the F2 key.
3. Then, the system setup window appears in a moment.
Phoenix SecureCore(tm) Setup Utility
Main
Advanced
Security
System Time:
[
]
[
]
System Date:
2009
Product Name:
Processor Type:
Processor Spd:
GHz
BIOS Version:
KBC Version:
UUID Number:
[
]
Pri Master
Total Memory:
MB
F1
Help
Select Item
-/+
ESC
Exit
Select Menu
Enter
Boot
Exit
Item Specific Help
<Tab>, <Shift-Tab>, or
<Enter> selects field
Change Values
F9
Setup Defaults
Select
Sub-Menu
F10
Save and Exit
21
Advertisement
Table of Contents
