Table of Contents
Advertisement
Default Settings
Default Settings
Factory Default Settings
To restore the StationPortal configuration to the factory default settings, press the Reset
pushbutton for 3 seconds.
Option
1
2
3
4
5
6
7
8
Power-On Values for above setting will be as per Last Saved values.
22
Setting
Ethernet IP address
Ethernet subnet mask
Ethernet default gateway
Serial baud rate
Parity for serial communications
Default States for Outputs
(Right Light, Left Light, Top Light, Horn,
and Outputs O1, O2 and O3)
Keep-alive time
Gigabit Switch
StationPortal Hardware User's Guide – February 2010
Factory Default Value
192.168.0.35
255.255.255.0
192.168.0.1
19200
None
0010000
(All outputs in "OFF" state except Top
light "ON")
3 sec
Yes
GFK-2522A
Advertisement
Table of Contents
