Ip Configuration - Siemens 7XG3124 ReyArc24 Technical Manual

Chapter 2) 7XG3124 Application Guide

1.3 IP Configuration

The IP Configuration screen displays and allows editing of the IP address parameters for the RJ45 port,
Fibre port, Gateway and the SNTP Server.
To change the IP address edit the IP address field and then click the Change button and enter the user
name and password if prompted.
Note that the Fibre port must be on a different IP network to the RJ45 port.
For time stamping in accordance to the IEC61850 standard an SNTP server is required. The SNTP server
IP address can be set in the IP Configuration screen but if left blank the RA24 will attempt to find a default
SNTP server if available.
Figure 4: RA24 IP Configuration
©2014 Siemens Protection Devices Limited Chapter 2 Page 8 of 42