Download Print this page

Populating Ieds In The Iec 61850 Project - Siemens 7XG3124 ReyArc24 Technical Manual

Arc fault monitor relay, energy management

Table of Contents

Chapter 2) 7XG3124 Application Guide

2.7 Populating IEDs In the IEC 61850 Project

We now need to populate the project with our IEDs, firstly the Reyrolle 7SR22. Choose Insert and

Device and you will be presented with the following screen.

Figure 13: Reydisp Manager – Add Device

Select the required relay, for this example we will choose a 7SR2202-2AA77-0CA0 ensure that the MLFB

code is correctly filled.

Figure 14: Reydisp Manager – Add Device 2

Once the MLFB code is correctly selected, you can then select the device.

Chapter 2 Page 18 of 42

Table of Contents

Table of Contents