Table of Contents
Advertisement
Preparation
Turning the unit on/off
≥ The method for turning on the unit depends on the setting of [POWER UP OPTION].
Press power button B for 2 seconds or more to turn on the unit.
A The status indicator lights on.
≥ Operation Mode icon (
(CAM Mode): Displayed when the unit is turned on while connected to the Camera Head.
j
(SDI Mode): Displayed when the unit is turned on while not connected to the Camera Head. It is also
j
displayed if the unit is turned on while pressing and holding the USER1 button after connecting the Camera Head.
≥ This unit may automatically reboot when turned on in the following cases.
j When turned on for the first time after connecting this unit with the Camera Head
j When turned on after connecting this unit with another Camera Head
The setup of the [ SCENE FILE ] menu saved in the Camera Head is reflected to this unit after the reboot.
≥ When in SDI Mode, to turn on the unit again after [ECONOMY (BATT)] or [ECONOMY (AC)] have worked, press the
power button for 2 seconds or longer to turn on the unit.
≥ Connecting or removing the Camera Head with this unit turned on may cause this unit and the Camera Head to
malfunction. Be sure to turn off this unit before connecting/disconnecting the Camera Head to/from it.
≥ If the camera head is faulty, such as a fault or a cable disconnection, [System error. Please turn off.] is displayed on
the LCD monitor, recording is not possible.
≥ When you switch to Playback Mode or turn off the unit with the power button, the unit memorizes the Camera
Head's zoom and focus positions. To start up the Camera Head while maintaining the zoom and focus positions
after turning off the unit without pressing the power button, perform the above operation in advance.
44
DVQX1262
/
) is displayed on the screen.
To turn off the unit
Press the power button for 2 seconds or more.
The status indicator goes off.
Advertisement
Table of Contents
