D-Link DAP-1620 Quick Install Manual page 10

What if I forgot my DAP-1620 password?
1. If you forgot your password or want to reset the DAP-
1620 back to the factory default settings, press and
hold the reset button on the bottom of the extender
using a paper clip and release after a minimum of 10
seconds. The Status light will turn red.
Note: This process will erase all your settings.
2. You may repeat the WPS process on page 5. Follow
the steps under Connect to Your Router Using WPS.
What if WPS setup is not working?
WPS may not be enabled on all Routers or Modems. If
the Status LED on your Range Extender does not turn
solid green after running WPS setup, try again. If it still
does not turn solid green, see Configure the DAP-1620
Using QRS Mobile Setup, on page 6.
10
Reset Button
DAP-1620 Install Guide