Troubleshooting - D-Link DAP-1620 Quick Install Manual

Why can't I connect to my wireless router or my wireless connection drops?
1. Verify that the DAP-1620 is within range of your wireless router. Try plugging it
into a location closer to the router and verify the Status LED is solid green.
2. Note that when repeating a wireless signal from a router or access point, devices
connected to the repeater will not get the same speed/throughput as when
connected directly to the router.
How do I change the wireless settings on the DAP-1620?
1. Open a web browser (e.g., Internet Explorer, Firefox, Chrome or Safari) and go to
http://dlinkap.local./
2. At the login screen, enter your password and click Log in.
3. Go to Setup > Wireless.
4. Enter a new Wi-Fi Network Name (SSID) for the 2.4GHz and 5GHz bands, and
modify the security (Wi-Fi password) settings as needed.
5. Click Save.
Note: If you have changed the Wi-Fi Network name, the device you are currently using to connect
to the DAP-1620 will drop. You will need to open your wireless utility and connect to the DAP-1620
using the new network name and password.
8

Troubleshooting

DAP-1620 Install Guide