D-Link DAP-1620 Quick Install Manual page 5

When the Status LED turns solid green, this indicates that the DAP-1620 is
4
securely connected to your wireless router or access point. You can now
unplug and move the DAP-1620 to a location between your wireless router
and the area that you need wireless coverage.
If after moving your DAP-1620, the signal strength
indicators are showing one single amber bar or if the
DAP-1620 is not connecting, (Status LED is no longer
green) move the DAP-1620 to a wall outlet closer to
your wireless router or access point.
Note: WPS may not be enabled on all Routers or Modems.
If the Status LED on your Range Extender does not turn
solid green after running WPS setup, try again. If it still
does not turn solid green, see Configure the DAP-1620
Using QRS Mobile Setup, on page 6.
Your setup is complete! To connect your wireless devices to your DAP-1620, see
Connect Your Wireless Devices, on page 7
DAP-1620 Install Guide 5