HP 5890 SERIES II Service Manual page 162

` FPD:
a. Connect the signal cable to its connector
on the FPD detector PCB.
b. Connect the high voltage cable to its con-
nector on the FPD detector PCB.
23. Restore all gas supplies to the instrument.
24. Install the right side panel and secure using
four screws.
25. Install the electronics carrier top cover.
26. Restore power to the HP 5890 Series II.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
SIGNAL CABLE
HIGH VOLTAGE
CABLE
SVC 4- 92